dark-pandora:/ # cat /etc/SuSE-release
SUSE LINUX Enterprise Server 9 (i586)
VERSION = 9

dark-pandora:~ # lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo  PRO133x]  (rev 22)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro13 3x AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 09)
0000:00:07.1 IDE interface: VIA Technologies, Inc.  VT82C586A/B/VT82C686/A/B/VT82  3x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 02)
0000:00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management
0000:00:12.0 Network controller: RaLink: Unknown device 0302
0000:00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd.  RTL-8139/8139C/8139C+ (rev 10)
0000:01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01)

dark-pandora:~ # hwinfo --netcard
16: PCI 12.0: 0280 Network controller
  [Created at pci.244]
  Unique ID: CLZK.J39p8Q8npMF
  SysFS ID: /devices/pci0000:00/0000:00:12.0
  SysFS BusID: 0000:00:12.0
  Hardware Class: network
  Model: "D-Link Network controller"
  Vendor: pci 0x1814 "RaLink"
  Device: pci 0x0302
  SubVendor: pci 0x1186 "D-Link System Inc"
  SubDevice: pci 0x3c09
  Memory Range: 0xeb000000-0xeb007fff (rw,non-prefetchable)
  IRQ: 12 (no events)
  Driver Info #0:
    Driver Status: rt61 is not active
    Driver Activation Cmd: "modprobe rt61"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

17: PCI 13.0: 0200 Ethernet controller
  [Created at pci.244]
  Unique ID: HSco.IQxIdIhhuH7
  SysFS ID: /devices/pci0000:00/0000:00:13.0
  SysFS BusID: 0000:00:13.0
  Hardware Class: network
  Model: "Realtek RT8139"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8139 "RTL-8139/8139C/8139C+"
  SubVendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  SubDevice: pci 0x8139 "RT8139"
  Revision: 0x10
  Driver: "8139too"
  I/O Ports: 0xe800-0xe8ff (rw)
  Memory Range: 0xeb008000-0xeb0080ff (rw,non-prefetchable)
  Memory Range: 0xea000000-0xea00ffff (ro,prefetchable,disabled)
  IRQ: 10 (5760 events)
  HW Address: 00:50:fc:a3:e4:51
  Driver Info #0:
    Driver Status: 8139too is active
    Driver Activation Cmd: "modprobe 8139too"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

dark-pandora:/lib/modules/2.6.5-7.97-default # modprobe rt61
FATAL: Error inserting rt61 (/lib/modules/2.6.5-7.97-default/extra/rt61.ko): Unknown symbol in module, or unknown parameter (see dmesg)

dark-pandora:~ # dmesg
Linux version 2.6.5-7.97-default (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 Fri Jul 2 14:21:59 UTC 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
 BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
757MB vmalloc/ioremap area available.
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65520
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 61424 pages, LIFO batch:14
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.0 present.
ACPI disabled because your bios is from 00 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: root=/dev/hda1 selinux=0 acpi=off resume=/dev/hda2 elevator=cfq splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
CKRM Initialization
...... Initializing ClassType<taskclass> ........
...... Initializing ClassType<socket_class> ........
CKRM Initialization done
Detected 701.807 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 254920k/262080k available (1963k kernel code, 6456k reserved, 688k data, 216k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1380.35 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux:  Disabled at boot.
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 0383f9ff 00000000 00000000 00000000
CPU:     After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU:     After all inits, caps: 0383f9ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Looking for DSDT in initrd ...No customized DSDT found in initrd!
Freeing initrd memory: 1201k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb0e0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0596] at 0000:00:07.0
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Initial HugeTLB pages allocated: 0
VFS: Disk quotas dquot_6.5.1
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using cfq io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c596a (rev 09) IDE UDMA33 controller on pci0000:00:07.1
    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 91301U3, ATA DISK drive
hdb: ST34321A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: LG DVD-ROM DRD-8160B, ATAPI CD/DVD-ROM drive
hdd: WDC WD205AA, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 25410672 sectors (13010 MB) w/512KiB Cache, CHS=25209/16/63, UDMA(33)
hda: cache flushes not supported
 hda: hda1 hda2 hda3
hdb: max request size: 128KiB
hdb: 8404830 sectors (4303 MB) w/128KiB Cache, CHS=8894/15/63, UDMA(33)
hdb: cache flushes not supported
 hdb: hdb1
hdd: max request size: 128KiB
hdd: 40079088 sectors (20520 MB) w/2048KiB Cache, CHS=39761/16/63, UDMA(33)
hdd: cache flushes not supported
 hdd: hdd1 hdd2
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: PC Speaker
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
Resume Machine: resuming from /dev/hda2
Resuming from device hda2
Resume Machine: This is normal swap space
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda1: checking transaction log (hda1)
reiserfs: disabling flush barriers on hda1
ReiserFS: hda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 216k freed
Adding 248996k swap on /dev/hda2.  Priority:42 extents:1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
reiserfs: disabling flush barriers on hda3
ReiserFS: hda3: Using r5 hash to sort names
ReiserFS: hdb1: found reiserfs format "3.6" with standard journal
ReiserFS: hdb1: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hdb1: journal params: device hdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdb1: checking transaction log (hdb1)
reiserfs: disabling flush barriers on hdb1
ReiserFS: hdb1: Using r5 hash to sort names
ReiserFS: hdd1: found reiserfs format "3.6" with standard journal
ReiserFS: hdd1: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hdd1: journal params: device hdd1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdd1: checking transaction log (hdd1)
reiserfs: disabling flush barriers on hdd1
ReiserFS: hdd1: Using r5 hash to sort names
ReiserFS: hdd2: found reiserfs format "3.6" with standard journal
ReiserFS: hdd2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hdd2: journal params: device hdd2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdd2: checking transaction log (hdd2)
reiserfs: disabling flush barriers on hdd2
ReiserFS: hdd2: Using r5 hash to sort names
subfs 0.9
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Apollo ProMedia/PLE133Ta chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xe0000000
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 11, io base 0000e400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.5-7.97-default uhci_hcd
usb usb1: SerialNumber: 0000:00:07.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
rt61: no version for "struct_module" found: kernel tainted.
rt61: unsupported module, tainting kernel.
rt61: Unknown symbol msleep
8139too Fast Ethernet driver 0.9.27
PCI: Found IRQ 10 for device 0000:00:13.0
eth0: RealTek RTL8139 at 0xd0c04000, 00:50:fc:a3:e4:51, IRQ 10
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
powernow: This module only works with AMD K7 CPUs
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdb: drive_cmd: error=0x04 { DriveStatusError }
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04 { DriveStatusError }
hdd: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: task_no_data_intr: error=0x04 { DriveStatusError }
Non-volatile memory driver v1.2
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
SCSI subsystem initialized
st: Version 20040318, fixed bufsize 32768, s/g segs 256
BIOS EDD facility v0.13 2004-Mar-09, 3 devices found
eth0: no IPv6 routers present
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
dark-pandora:~ #