Hi,
Hm, die Werte scheinen OK zu sein und haben Sinn. Ich wuerde ein # e2fsck -f -p auf alle Linux-Partitionen laufen lassen. BTW, gibts Unregelmaessigkeiten bei den smartmontools?
ein # smartctl -a /dev/hda liefert folgendes: Die Errors sind jedenfalls sicher nicht normal.
smartctl version 5.30 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION === Device Model: ST360020A Serial Number: 5EX00GJQ Firmware Version: 3.34 Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 24 20:58:44 2004 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled
=== START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED
General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 420) seconds. Offline data collection capabilities: (0x1d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 62) minutes.
SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 063 050 025 Pre-fail Always - 107731 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 274 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 53 7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 108336556 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 8119 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1938 194 Temperature_Celsius 0x0022 049 056 000 Old_age Always - 49 195 Hardware_ECC_Recovered 0x001a 100 253 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 193 000 Old_age Always - 52 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1 ATA Error Count: 171 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Timestamp = decimal seconds since the previous disk power-on. Note: timestamp "wraps" after 2^32 msec = 49.710 days.
Error 171 occurred at disk power-on lifetime: 5170 hours When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 48 06 77 e3 Error: ICRC, ABRT at LBA = 0x03770648 = 58132040
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c8 00 30 48 06 77 e3 00 3.512 READ DMA c8 00 50 a0 fb dc e3 00 1.013 READ DMA c8 00 20 80 fb dc e3 00 20.414 READ DMA c8 00 04 d8 f0 75 e3 00 16.538 READ DMA c8 00 58 88 ee de e3 00 1.107 READ DMA
Error 170 occurred at disk power-on lifetime: 5145 hours When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 c9 c7 32 e0 Error: ICRC, ABRT at LBA = 0x0032c7c9 = 3327945
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c8 00 28 c9 c7 32 e0 00 1.256 READ DMA ca 00 08 1f 16 c7 e2 00 2.647 WRITE DMA ca 00 08 9f 15 c7 e2 00 1.782 WRITE DMA ca 00 08 1f 15 c7 e2 00 1.785 WRITE DMA ca 00 08 9f 14 c7 e2 00 1.938 WRITE DMA
Error 169 occurred at disk power-on lifetime: 5099 hours When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 f7 6f f1 e1 Error: ICRC, ABRT at LBA = 0x01f16ff7 = 32600055
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c8 00 80 f7 6f f1 e1 00 0.080 READ DMA c8 00 80 77 6f f1 e1 00 1.499 READ DMA c8 00 80 f7 6e f1 e1 00 1.500 READ DMA c8 00 80 77 6e f1 e1 00 10.342 READ DMA c8 00 80 f7 6d f1 e1 00 1.495 READ DMA
Error 168 occurred at disk power-on lifetime: 4984 hours When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 f8 b5 bd e4 Error: ICRC, ABRT at LBA = 0x04bdb5f8 = 79541752
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c8 00 10 f8 b5 bd e4 00 1.104 READ DMA e7 00 08 00 00 00 a0 00 22.493 FLUSH CACHE ca 00 08 17 01 8c e1 00 0.397 WRITE DMA ca 00 20 c7 e6 d9 e1 00 0.710 WRITE DMA ca 00 08 b7 e6 d9 e1 00 0.393 WRITE DMA
Error 167 occurred at disk power-on lifetime: 4976 hours When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 df 0f cd e1 Error: ICRC, ABRT at LBA = 0x01cd0fdf = 30216159
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c8 00 80 df 0f cd e1 00 0.111 READ DMA c8 00 08 d7 0f cd e1 00 8.017 READ DMA c8 00 46 0f 14 cd e1 00 0.817 READ DMA c8 00 08 07 14 cd e1 00 7.781 READ DMA c8 00 07 74 1b cb e1 00 0.124 READ DMA
SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t]
Wie bekomm ich eigentlich solche Ausgaben vom xterm oder eterm in eine mail, ohne den Umweg über pipelining in deine txt-datei und dann kopieren?
Grüße
Martin