-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
http://www.linuxjournal.com/article/6712 sagt hierzu:
"Customizing lm_sensors
[...]
Ideally, before you edit /etc/sensors.conf, you should reboot your computer and enter the BIOS setup screens. (For most computers, you hit the Del key or the F1 key during bootup to enter the BIOS. Check the owner's manual for your system, or watch the screen during bootup for a message like Hit <Del> to enter Setup.) The BIOS setup should have a sub-menu showing the same numbers you would like lm_sensors to report. Make a note of the readings you are seeing. For example, if the CPU temperature is about 60 degrees Celsius, write that down."
Hoffe, das hilft weiter!
Grüße, K@i
Luca Bertoncello wrote:
Hallo, Liste!
Ich habe eine Mainboard ASRock K7VT6 und habe lm_sensors installiert (das Betriebssystem ist Kubuntu 6.10). Leider sehe ich immer ALARM:
w83697hf-isa-0290 Adapter: ISA adapter VCore: +1.60 V (min = +1.71 V, max = +1.89 V) ALARM +3.3V: +3.22 V (min = +3.14 V, max = +3.47 V) +5V: +4.87 V (min = +4.76 V, max = +5.24 V) +12V: +11.86 V (min = +10.82 V, max = +13.19 V) -12V: +1.46 V (min = -13.18 V, max = -10.80 V) ALARM -5V: +2.49 V (min = -5.25 V, max = -4.75 V) ALARM V5SB: +5.40 V (min = +4.76 V, max = +5.24 V) ALARM VBat: +4.06 V (min = +2.40 V, max = +3.60 V) ALARM fan1: 5625 RPM (min = 1795 RPM, div = 8) fan2: 4326 RPM (min = 1102 RPM, div = 8) temp1: +31°C (high = +123°C, hyst = -26°C) sensor = thermistor temp2: +49.0°C (high = +80°C, hyst = +75°C) sensor = thermistor alarms: beep_enable: Sound alarm enabled
Ich bin aber 100% sicher, daß keine "echte" Alarme sind, sondern einfach falsche Konfigurationen... Leider verstehe ich wirklich nicht, wie ich die Datei sensors.conf anpassen soll um die richtige Werte zu sehen (und die entsprechenden Alarme erst bekommen, wenn sie ECHTE Alarme sind).
Kann jemand mir helfen?
Vielen Dank Luca Bertoncello (lucabert@lucabert.de)
Lug-dd maillist - Lug-dd@mailman.schlittermann.de https://ssl.schlittermann.de/mailman/listinfo/lug-dd