hallo,

so, mein erstes posting:

ich moechte gern einen IDE-CD-Brener, sony CDU928E, ca. 3-4 jahre alt, unter suse6.4 betreiben. habe mich an die anleitung auf suse.de gehalten. (http://sdb.suse.de/sdb/de/html/mkrapp_6.4_atapi-brenner-d.html)

die /etc/lilo.conf sieht so aus: <snip> # LILO configuration file # Start LILO global Section # If you want to prevent console users to boot with init=/bin/bash, # restrict usage of boot params by setting a passwd and using the option # restricted. #password=bootpwd #restricted initrd=/boot/initrd append="hdc=ide-scsi" boot=/dev/hda #compact # faster, but won't work on all systems. linear vga=normal read-only prompt timeout=30 # End LILO global Section # image = /boot/vmlinuz root = /dev/hda3 label = linux

# image = /boot/vmlinuz.suse root = /dev/hda3 label = suse

# other = /dev/sda4 label = windows map-drive = 0x80 to = 0x81 map-drive = 0x81 to = 0x80 table = /dev/sda </snip>

nach dem booten (suse-kernel) sieht es so aus: <snip> peter@sabine:~ > dmesg Linux version 2.2.14 (root@Pentium.suse.de) (gcc version 2.95.2 19991024 (release)) #1 Sat Mar 25 00:45:35 GMT 2000 Detected 801848596 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1599.08 BogoMIPS Memory: 192064k/196544k available (1416k kernel code, 416k reserved, 2264k data, 64k init, 0k bigmem) Dentry hash table entries: 32768 (order 6, 256k) Buffer cache hash table entries: 262144 (order 8, 1024k) Page cache hash table entries: 65536 (order 6, 256k) VFS: Diskquotas version dquot_6.4.0 initialized CPU: L1 I Cache: 64K L1 D Cache: 64K CPU: L2 Cache: 512K CPU: AMD AMD Athlon(tm) Processor stepping 02 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) PCI: PCI BIOS revision 2.10 entry at 0xfb460 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 262144 bhash 65536) Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 64000K size loop: registered device at major 7 Uniform Multi-Platform E-IDE driver Revision: 6.30 ide: Assuming 40MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD102AA-00BAA0, ATA DISK drive hdc: CD-R CDU928E, ATAPI CDROM drive hdd: LTN382, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: WDC WD102AA-00BAA0, 9787MB w/2048kB Cache, CHS=1247/255/63 hdc: ATAPI 8X CD-ROM CD-R drive, 384kB Cache Uniform CDROM driver Revision: 2.56 hdd: ATAPI 40X CD-ROM drive, 120kB Cache Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 LVM version 0.8e by Heinz Mauelshagen (4/1/2000) lvm -- Driver successfully initialized md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 linear personality registered raid0 personality registered raid1 personality registered raid5 personality registered scsi : 0 hosts. scsi : detected total. Partition check: hda: hda1 hda2 hda3 RAMDISK: Couldn't find valid RAM disk image starting at 0. VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 64k freed cdrom: open failed. VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,64) Adding Swap: 136544k swap-space (priority -1) scsi0 : SCSI host adapter emulation for IDE ATAPI devices scsi : 1 host. Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A rtl8139.c:v1.08 6/25/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html rtl8139.c:v1.08 6/25/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html eth0: RealTek RTL8139 Fast Ethernet at 0xe800, IRQ 11, 00:30:84:0b:6b:4e. snd: card is out of range (0-0) paride: version 1.04 installed </snip>

wenn ich das richtig verstehe, wird also ein emulierter scsi-host erkannt. normalerweise sollte jetzt:

<snip> root@sabine:/home/peter > cdrecord -scanbus Cdrecord 1.8 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jrg Schilling cdrecord: Datei oder Verzeichnis nicht gefunden. Cannot open SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root. </snip>

was positives bringen, aber ..

wie mounte ich denn ausserdem den brenner? dateisystem? woher weiss ich denn, ob sich hinter /dev/scd0 usw. auch wirklich etwas verbirgt oder nur ne deviceleiche ist?

so, jetzt bin ich ja mal gespannt.

tschuess

peter

ps: kuemmert sich noch jemand um die webseite der lug-dd? macht ein ziemlich verweisten eindruck.